Calculated Industries 7434 AccuMASTER 2-in 1 Magnetic Digital Level and Angle Finder / Inclinometer / Bevel Gauge, Latest MEMs Technology, Certified IP54 Dust and Water Resistant

Why put up with less-featured, less-reliable digital angle gauges in your shop? Click Add to Cart now and get the new AccuMASTER today! Copyright 2018 Calculated Industries. Dual functionality -- inclinometer or tilt gauge to set or check relative angles between surfaces, also works as true digital level for tight spots.

The always on stayglow backlit display drastically improves usability and two included AAA batteries with auto shut-off guarantees longer battery life. Table saw blade angle setting, planes and knives, the angle on a sliding t-bevel, miter gauge setting for bandsaws, or disc sanders, spindle angles on your shaper, or planer, checking bevels for sharpening chisels, table tilts on your band saw or drill press, or even measuring the angles of the wall and floor surfaces where you install your wood works.

Dependability – unlike earlier technology models that drain batteries just sitting in a drawer, the new AccuMASTER uses a low-power MEMS sensor for utmost accuracy and minimal power consumption. All rights reserved. Certified ip54 dust and water resistant; includes two long-life AAA batteries, battery-saving auto shut off and protective case with belt loop.

And it comes with a TWO Year Warranty. Easy to read -- large, bright stayglow tm display stays on as long as you're using it, improving visibility and usability. Size 2-1/4 x 2-1/4 x 1-1/4 inches.

---

Wixey WR25 Mini Digital Height Gauge

The wixey wr25 mini digital height gauge is a Light Weight, Easy to Use Gauge for all Types of Wood Working Applications. Lays flat for fence to blade or bit positioning. Measure bore and slot depths with the plunger attachment. The decimal Inches are Displayed in. 002-inch increments and The Millimeters in. 1mm Increments.

The accuracy and Repeatability Are. 004-inch. 1mm displays inches with fractions or millimeters. The fractions are displayed using Precise Fraction Technology which Gives you 4 Times The Accuracy of Other Fraction Readouts. The large easy to read Display Reads in Inches with Fractions or Millimeters. Locking rule for repeat setting.

Use this gauge for setting saw blade and Router Bit Heights as Well as Positioning Fences on Router Tables and Band Saws.


Similar products

---

General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One

Details: large lcd four control buttons provide five functions: power on/off, reading hold, read reverse angle, Flip display, Clear readout Auto power off Stainless steel blade Impact-resistant ABS handle Power source: "CR2032" Lithium-ion battery included SPECIFICATIONS: Range: 0 to 360° Accuracy: ±0.

3° resolution: 005° blade length: 8 in. Transitional display - digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Durable - commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle. Locking rule for repeat setting.

We strive to provide our customers with 100% satisfaction guaranteed. For inquiries, please contact our Customer Service Department at 212-431-6100 Lays flat for fence to blade or bit positioning. General tools - the precise tool for doing the job exACTLY RIGHT. Work smarter, measure better & be more productive with general tools displays inches with fractions or millimeters.

This highly accurate digital angle finder offers easy-to-read measurements via a large LCD display and has an 8" stainless steel blade and steel locking knob. Dual application - t-bevel/digital protractor combo- is made with an ergonomic impact resistant handle with 8-inch stainless steel blade used for taking measurements.




Similar products

---

Johnson Level & Tool and Tool 700 Magnetic Angle Locator

46 pounds. 700 features: -magnetic angle locator. High-impact plastic body. Permanent ceramic magnet; metric and English rule. Generic dimensions: -101-year limited. 5 inches. High-impact molded body. 88'' d. 88 inches. Displays inches with fractions or millimeters. Product type: -rulers. Helpful for setting machine angles or for obtaining any angle.

Holds measurements- on digital angle finder for transfers between different surfaces or jobs. Lays flat for fence to blade or bit positioning. Strong, magnetic contact for accurate angle identification. Overall depth - front to back: -1. Durable - commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle.

19'' w x 1. Dimensions: overall length - Side to side: -6. Overall product weight: -0 Overall height - top to bottom: -10 Full lcd display with large digital angle readout. Automatic shut-off- feature that preserves battery life of the woodworking tool.


Similar products

---

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched precisionstabilize your cut with the built-in balance Support to square your cut and safely handle the smallest parts of wood When cutting on the table saw or router Table.

A true microJIG innovation. Permanent ceramic magnet; metric and English rule. 100% satisfaction Guaranteed. 3-directional Force for total control of the workpiece. Full lcd display with large digital angle readout. Automatic shut-off- feature that preserves battery life of the woodworking tool. Precise 1/4" thin rips.

Grr-ripper 3d push Block a must-have for any table saw user. Essential protectionit's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect hands and prevent kickback like never before. Strong, magnetic contact for accurate angle identification.

Measure bore and slot depths with the plunger attachment. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents.


Similar products

---

GemRed 82305 Digital Angle Finder 7-Inch Protractor 200mm Stainless Steel Angle Finder Ruler

Transitional display - digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Moving-blade-Guard Hand protection. Powerful high-friction durable grip for extreme hold. Locking screw for holding any angle. Display resolution 01 degree. It may apprear on brand-new product.

Virtually eliminates kickback. Holds measurements- on digital angle finder for transfers between different surfaces or jobs. Lays flat for fence to blade or bit positioning. A true micrOJIG Innovation. Extended 3-year warranty. The display could not read up-side-down. Full lcd display with large digital angle readout.

Automatic shut-off- feature that preserves battery life of the woodworking tool. Locking rule for repeat setting. Durable - commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle. Measure bore and slot depths with the plunger attachment. Work with small stock safely on the table saw, Jointer, Router table, & Band saw.




Similar products

---

General Tools 822 Digital Angle Finder Rule, 5-Inch

Durable - commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle. Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles. Ruler and protractor combination for easy measuring. Lays flat for fence to blade or bit positioning.

Holds measurements- on digital angle finder for transfers between different surfaces or jobs. Total length 400mm. Zeroing at any angle for relative measuring. Protect hands and prevent kickback like never before. Digital angle finder, measurement range 0 Degrees to 360 degrees F, Accuracy +/-01 degrees, size 5 In.

Stainless steel construction, housing material plastic, number of level vials 0, number of plumb vials 0, Jumbo LCD hinge mechanism provides full 360 degrees for measuring inside and outside and reverse angles, number of magnets 0, can be zeroed at any point in the swing, LCD display, power Source Lithium battery, Features lock and reverse angle modes, includes battery' Displays inches with fractions or millimeters.

Locking screw for holding any angle. Display resolution 01 degree. Permanent ceramic magnet; metric and English rule. Strong, magnetic contact for accurate angle identification.


Similar products

---

A-Line It Basic Kit with Dial Indicator For Aligning and Calibrating Work Shop Machinery Like Table Saws, Band Saws and Drill Presses

Holds measurements- on digital angle finder for transfers between different surfaces or jobs. Transitional display - digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Lays flat for fence to blade or bit positioning. Check table saw blade and fence alignment, jointer/planer head to table parallelism, miter slot to blade squareness, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, arbor/chuck run-out, arbor and blade run-out, or any other set up or alignment measurement you desire.

Protect hands and prevent kickback like never before. 1-year limited. The 1" capacity dial indicator reads in. 001" increments for absolute precision. Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool. Locking rule for repeat setting.

High-impact plastic body. Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN. Quick and clear digital readout.


Similar products

---

Neoteck Digital Angle Finder, Backlight LCD Digital Angle Gauge Protractor Inclinometer Bevel Box, Magnetic Base, Data Hold, IP54 Dust and Water Resistant- Blue

Fully adjustable for easy handling. Strong, magnetic contact for accurate angle identification. High-impact plastic body. Work with small stock safely on the table saw, Jointer, Router table, & Band saw. Made in usa. The display could not read up-side-down. Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches.

Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool. Quickly set-up, jointer/planer head to table parallelism, and check the accuracy of your shop's tools with this system. Features: small and light makes it convenient to carry values can be clearly and easily read on the lcd display built-in magnets on the base which secures the Attachment to Any Iron Surface Provides Relative and Absolute Measurements and Zero Setting to Any Position Powered by 2 x LR03 AAA Battery（Included） Auto Power Off After 3 Minutes of No Operation Specifications: Color: BlueMeasuring Range:±180°（0-360°） Resolution: ±0

01 degrees at 0-1 and 89-90 Degrees; ±005 degrees at the Rest Accuracy: ±01 degrees at 0-1 and 89-90 Degrees; ±02 degrees at the rest 4 units: °，%，in/ft, mm/m waterproof: ip54 power: 2 x lr03 aaa battery（included） weight: 70g Package Included: 1 x Digital Level Box 2 x LR03 AAA Battery1 x Bag 1 x User Manual Displays inches with fractions or millimeters.

Ruler and protractor combination for easy measuring.


Similar products

---

Digital Height Gauge Depth Gauge with Three Measurement Modes, Magnet Based, Stainless Steel Locking Screw, Large Digital Display for Woodworking, Router Table - MDG01

Tacklife - professional team on Amazon, which deals only with development of the tools. We commit ourselves to using qualitative tools to improve the quality of life. Key features: ✔ horizontal and vertical measurement  ✔ Steel rule dual metric for hand routers and routers tables  ✔ Stainless steel locking screw for holding measurement ✔ Digital display for easy reading ✔ 5.

60mm wide aperture&accurate to 01mm/0004in ✔ self-standing for setting cutter depth on routers tables and low profile for back fence adjustment Specifications: Measuring Range : Height:80mm ; 3 1/8 inch  Depth:50mm Resolution : 005mm / 0002 inchaccuracy : 010mm / 0004 inch.


Similar products

---

General Tools TS02 ToolSmart Bluetooth Connected Digital Angle Finder, Protractor, Level and 10.5-Inch Ruler

Durable - commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle. 100% satisfaction Guaranteed. 3-directional Force for total control of the workpiece. Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App.

Powerful high-friction durable grip for extreme hold. A true micrOJIG Innovation. Extended 3-year warranty. Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN. Quick and clear digital readout. Ruler and protractor combination for easy measuring. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot.

Dial indicator mounting bar measures 3/4" x 3/4" x 5-1/2", miter groove bar measures 3/8" x 3/4" x 6-1/4". Comes with hardware and hex wrench for assembly, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines. Digital angle finder】the digital angle finder with 4 x 90° measuring range, Small and Light, making it Convenient to Carry and Used, is Designed for Setting or Checking Relative Angles between Surfaces, Also Working as True Digital Level for Tight Spots.

Backlit lcd display】values can be clearly and easily Read on the LCD Display; Displays Bevels in Degrees, IN/FT, mm/M, Percent Slope. Built-in magnets】there are powerful Built-in Magnets on the Base Which Secures the Attachment to Any Iron Surface.


Similar products