Ideal 30-902 Spin-Twist Wire Connector Socket


Fotronic Corporation 30-902 - 1/4" chuck fits most drills or drive sockets. Speeds installation of IDEAL and BUCHANAN Wire Connectors. Ideal 30-902 spin-Twist Wire Connector Socket. For use with electric corded or cordless drill drivers.

More information about Fotronic Corporation 30-902

Rack-A-Tiers 72101 The Nut Blaster XL - Universal Wire Connector Tool


Rack A Tiers XL - For more information go to www. P65warnings. Ca. Gov. Installs fast. Sold on Amazon. Prevents sore fingers and cramping hands. Works in all quick release adapters, power screwdrivers and drills. Fits all brands: Yellow, Tan and Red twist on wire connectors. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

More information about Rack A Tiers XL


Similar products



Universal Wire Connector Tool - Rack-A-Tiers 72102 The Nut Blaster XXL


Rack A Tiers XXL - Sold on Amazon. Fits all brands: large Gray and Blue twist on wire connectors. Helps alleviate repetitive motion injuries. For best results, place the connector over ends of wires by hand and twist until connector grips wires. Increases productivity. Prevents sore fingers and cramping hands. Works in all quick release adapters, power screwdrivers and drills.

Installs fast. High impact heat stabilized delryn plastic. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Do not over tighten. Place nut blaster over connector and activate power tool. Only 3-4 revolutions are required to tighten properly.

Universal Wire Connector Tool - Rack-A-Tiers 72102 The Nut Blaster XXL - For more information go to www. P65warnings. Ca. Gov. Prevents sore fingers and cramping hands. Fast and easy installation.

More information about Rack A Tiers XXL


Similar products



Gardner Bender WB1 Connector Bit Set, ¼ in. Electrical Driver, Fits: Standard and Winged Wire Nuts, 3 Pk, Black


Gardner Bender WB1 - Our connectors provide maximum application flexibility by offering contractors and do it yourself-ers varied packaging options, ergonomic designs and wire ranges. High impact heat stabilized delryn plastic. Tighten connectors: using powered drill/driver, nut driver, or multi-bit screwdriver. Sold on Amazon.

Prevents sore fingers and cramping hands. Design: includes bits for standard and winged wire connectors from most manufacturers, in a broad range of sizes. Perfect for commercial or residential applications GB Wire Connectors offer world-class quality, performance, and application versatility. Increases productivity.

Gardner Bender WB1 Connector Bit Set, ¼ in. Electrical Driver, Fits: Standard and Winged Wire Nuts, 3 Pk, Black - Gardner bender wire connectors are engineered to exceed the expectations of professional electricians. Design: compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers. Size: fits standard and winged style connectors, in a broad range of sizes. Size: fits connectors from most manufacturers.

Size: small tool for small to medium standard; medium tool for small winged, medium to large standard; large tool for large/winged. Fast and easy installation. 0

More information about Gardner Bender WB1


Similar products



Milwaukee 48-32-2350 SHOCKWAVE Conduit Reaming Bit Holder 1/2in, 3/4in & 1in EMT Original Version


Milwaukee - Includes: • 1 shockwave conduit reaming bit holder • 4 Shockwave Driver Bits: PH2, SQ2, ECX2 and SL 1/4 in. And 1in. Design: includes bits for standard and winged wire connectors from most manufacturers, in a broad range of sizes. The shockwave conduit reaming bit holder features replaceable blades 48-32-2351 for extended life.

Emt • thick, hardened tool steel blade provides up to 5x blade life • Slim profile for common electrical fastening applications • Use with Milwaukee replaceable blades 48-32-2351 Sold on Amazon. And 1 in. Emt, the thick, hardened tool steel blade provides up to 5X blade life vs. Helps alleviate repetitive motion injuries.

Milwaukee 48-32-2350 SHOCKWAVE Conduit Reaming Bit Holder 1/2in, 3/4in & 1in EMT Original Version - High impact heat stabilized delryn plastic. Increases productivity. Sold on Amazon. The slim profile allows access for common electrical fastening applications. Made for use with 1/2 in. 3/4 in. Size: fits standard and winged style connectors, in a broad range of sizes. Design: compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers.

More information about Milwaukee


Similar products



PANOVOS 1pc Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye hook bolt


PANOVO - Increases productivity. This drills nut driver bit tools designed to tighten or loosen wing nuts, C hooks screws quickly and effectively when installing hurri shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster. Quickly to tighten simply turn the wing nut by power drill.

0 Size: fits standard and winged style connectors, in a broad range of sizes. Design: compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers. Helps alleviate repetitive motion injuries. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17.

PANOVOS 1pc Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye hook bolt - 8mm07 inch; and the slots on the drill bit tool is 4mm1. 55 inch wide. This bits a must have for hurricane Snowstorm prone areas. Your impact driver or drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand. Just pop it into a power screwdriver and get the wingsnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank.

More information about PANOVO


Similar products



Ideal 35-688 21-in-1 Twist-A-Nut Multi-Bit Screwdriver


Fotronic Corporation 35-688 - The 21-in-1 twist-a-nut ratcheting Screwdriver by IDEAL is a great tool to handle many needs. Tighten connectors: using powered drill/driver, nut driver, or multi-bit screwdriver. Textured santoprene™ grip provides excellent torque and resists perspiration, water, oil and chemicals. Sold on Amazon. Ergonomic, slip resistant comfort grip.

. Design: includes bits for standard and winged wire connectors from most manufacturers, in a broad range of sizes. Of torque without fail. 0 Design: compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers. High impact heat stabilized delryn plastic. It has a wire connector wrench that accepts a variety of connectors and reduces finger fatigue.

Ideal 35-688 21-in-1 Twist-A-Nut Multi-Bit Screwdriver - Size: small tool for small to medium standard; medium tool for small winged, medium to large standard; large tool for large/winged. The pro-quality, 28-tooth, all-metal ratchet can handle 225 lbs. Size: fits connectors from most manufacturers. Fast and easy installation. Increases productivity. Wire-nut connector wrench reduces finger fatigue and gets in tight spots.

More information about Fotronic Corporation 35-688


Similar products



Madison Electric Products MH8110 Wiresmart Cable Dispenser


Madison Electric Products MH8110 - 3 item in 1, and has the capacity to support 1, our dispenser come with both floor and stud mounting brackets, 000 ft. Prevents sore fingers and cramping hands. Your impact driver or drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand. Just pop it into a power screwdriver and get the wingsnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Tighten connectors: using powered drill/driver, nut driver, or multi-bit screwdriver. Size: fits connectors from most manufacturers. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17.

Madison Electric Products MH8110 Wiresmart Cable Dispenser - 8mm07 inch; and the slots on the drill bit tool is 4mm1. 55 inch wide. This bits a must have for hurricane Snowstorm prone areas. This drills nut driver bit tools designed to tighten or loosen wing nuts, C hooks screws quickly and effectively when installing hurri shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster.

More information about Madison Electric Products MH8110


Similar products



VOLTCLAW MTG Nonconductive Electrical Wire Pliers


Nonconductive Tool Company, LLC VC-MTG - Your impact driver or drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand. Just pop it into a power screwdriver and get the wingsnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. It is lightweight and nonconductive. Tighten connectors: using powered drill/driver, nut driver, or multi-bit screwdriver. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17.

VOLTCLAW MTG Nonconductive Electrical Wire Pliers - 8mm07 inch; and the slots on the drill bit tool is 4mm1. 55 inch wide. This bits a must have for hurricane Snowstorm prone areas. Design: compatible with powered drills/drivers, 1/4" nut drivers, and many multi-bit screwdrivers. For 6 to 14 Gauge wires. For safely Moving Electrical Wires. The voltclaw Multi-Gauge does not damage wire insulation.

More information about Nonconductive Tool Company, LLC VC-MTG


Similar products



Klein Tools RT210 GFCI Receptacle Tester for North American AC Electrical Outlet Receptacles


Klein - Geneva Supply RT210 - Textured santoprene™ grip provides excellent torque and resists perspiration, water, oil and chemicals. Bright flashlight illuminates work area and may be used independent of voltage detection function. Versatility of 3 items in 1. Heavy-duty chrome vanadium shafts provide robust strength and long life for professional use.

Works on gfi outlets and confirms operation of the ground fault protective device. Your impact driver or drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand. Just pop it into a power screwdriver and get the wingsnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

Klein Tools RT210 GFCI Receptacle Tester for North American AC Electrical Outlet Receptacles - This wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. With arms, 100 lbs. Includes 2-brackets to mount to floor or stud. Ergonomic, slip resistant comfort grip. Detects the most common wiring problems in standard and GFCI receptacles. 0-1, 000 volts. Prevents sore fingers and cramping hands.

Nominal voltage: 110/125v ac at 50/60Hz in 3-wire outlet.

More information about Klein - Geneva Supply RT210


Similar products



Klein Tools 11048 Dual Wire Stripper Cutter for Solid Wire


Klein 11048 - Color-coded handle: yellow indicates solid wire. Size: fits standard and winged style connectors, in a broad range of sizes. Heavy-duty chrome vanadium shafts provide robust strength and long life for professional use. Pulls, pushes and Bends Wires. One stripping hole for 10 AWG solid wire. Shear-type cutting blades for square, clean cuts.

Strips two wires in a single motion. Premium screwdriver ratchet mechanism can handle high torque without failure. Ergonomic, slip resistant comfort grip. This tool is designed for use with 10-14 AWG solid wire. Square-tube steel with a premium powder coat finish. Works on gfi outlets and confirms operation of the ground fault protective device.

Klein Tools 11048 Dual Wire Stripper Cutter for Solid Wire - High impact heat stabilized delryn plastic. With arms, 100 lbs. 0 Precision-ground stripping holes for easy removal of insulation. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17.

More information about Klein 11048


Similar products