OSD Audio – SPW8 Whole House Audio 8-Zone Speaker Distribution Panel Single Audio Input 300W Per Channel

#ad
#ad
OSD Audio SPW-8 #ad - All outputs are labeled easing both connection and troubleshooting of a system specifications power handling: 150 watts RMS per channel suitable for use with 300 watt per channel rated receivers/amplifiers Frequency Response: 20 Hz - 22kHz +0dB, -0dB Wire size acceptance: 2 or 4 conductor, stranded, 16 AWG to 14 AWG Dimensions: L 3.

40 in. Speaker wire acceptance - 2 or 4 Conductor, Stranded, 16 AWG to 14 AWG. 150w power handling - 150 watts rmS, Will work with Amplifier Rated up to 300 Watts. The spw-8 is a stereo two channel, eight output, one input, broad frequency response, volume control distribution hub. Compact design - simple compact design measuring at 3.

OSD Audio - SPW8 Whole House Audio 8-Zone Speaker Distribution Panel Single Audio Input 300W Per Channel #ad - 4" x 1. 7" x 7". Easy installation - with removable input and output connectors, set up will take minutes. X h 7. 00 in maximum number of volume control/speaker connections: 8 pairs Must be used with impedance matching volume controls Maximum number of speakers - We recommend using no more then 8 pairs of speakers for this unit.

It provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of stereo speakers to a single stereo receiver/amplifier. X w 1. 70 in.

More information about OSD Audio SPW-8 #ad

OSD Audio - White, Ivory, Almond - SVC100 Impedance Matching 100W In-Wall Rotary Knob Style Home Theater Speaker Volume Control Switchable Decora Plates

#ad
#ad
OSD Audio SVC100 #ad - During setup, you'll set the source volume to its optimum level, then the volume control turns the sound down to inaudible levels. Steps: 12 make before break total attenuation: 42 dB Max Includes White, Ivory and Almond Plates, Inserts and Knobs Fits in a standard gang box Measures 4. 125cm w x 6. 35cm h x 6.

35cm d 5-yr warranty whole-house volume control: a complete decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office. Decora style design: installs easily and works with almost any audio system, includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible.

Includes adjustable jumpers: rated at 100 watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle. Impedance matching protection: Includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging your receiver or amplifier.

OSD Audio - White, Ivory, Almond - SVC100 Impedance Matching 100W In-Wall Rotary Knob Style Home Theater Speaker Volume Control Switchable Decora Plates #ad - A complete vc kit: designed to provide low distortion and a ruler flat frequency response, accepts up to 14-gauge wiring and includes junction box and screws. Please update our item. For one to two pairs of 8-ohm speakers, the setting is 1/2x; for three or four pairs of 8 ohm speakers, the setting is 4X. A basic multi-room system will typically have an amplifier/receiver, a speaker selector, four to eight pairs of speakers, and volume controls.

More information about OSD Audio SVC100 #ad


Similar products



VMS100 Impedance Matching 100W In-Wall Slider Style Home Theater Speaker Volume Control Switchable Decora Plates - White, Ivory, Almond - OSD Audio

#ad
#ad
OSD Audio VMS100 #ad - Designed for whole house audio systems, osd audio’s vMS100 is a heavy-duty yet decorative impedance-matching volume control that is ideal for adjusting the volume of a pair of speakers independently in various rooms of your whole house audio system. Compatible with almost any dedicated audio zone or whole house system, the VSM100 provides a ruler-flat frequency response while the 12-step slider offers noise-free volume control and a wide range of listening volumes.

Steps: 12 make before break total attenuation: 42 dB Max Includes White, Ivory and Almond Plates, Inserts and Knobs Fits in a standard gang box Measures 4. 125cm w x 6. 35cm h x 6. 35cm d 5-yr warranty whole-house volume control: a complete decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office.

VMS100 Impedance Matching 100W In-Wall Slider Style Home Theater Speaker Volume Control Switchable Decora Plates - White, Ivory, Almond - OSD Audio #ad - Decora style design: installs easily and works with almost any audio system, includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible. Includes adjustable jumpers: rated at 100 watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle.

Impedance matching protection: Includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging your receiver or amplifier. A complete vc kit: designed to provide low distortion and a ruler flat frequency response, accepts up to 14-gauge wiring and includes junction box and screws.

Please update our item.

More information about OSD Audio VMS100 #ad


Similar products



Russound ALT126R Decora Volume Control, White/Light Almond

#ad
#ad
Russound ALT126R #ad - 126w 42w rms, decora style plate and knob detachable, autoformer based impedance matching, 4 ohms minimum, 12 steps of volume including off, easy access impedance switch behind front plate, 12 gauge max wire Size, includes white and light almond plates and knobs.8-ohm amp: up to 8 pairs of 8-ohm speakers or 4 pairs of 4-Ohm speakers.

Adjustable impedance magnification 1x, and 8x with easy-to-use, 2x, 4x, front-mounted selection switch.4-ohm amp: up to 16 pairs of 8-ohm speakers or 8 pairs of 4-Ohm speakers. Power handling: 42 watts RMS per Channel 126 watts peak. Convenient volume control: a decora style impedance-matching volume control kit for whole house audio systems that allows you to control speaker volume independently in each audio zone.

Russound ALT126R Decora Volume Control, White/Light Almond #ad - Maintains high fidelity: rated at 100 watts peak, maintains the full hi-fi audio frequency response with no low frequency roll-off and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. Impedance matching protection: installs easily and works with almost any audio system, includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging the amplifier.

Decora style design: includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point vertical slider to adjust volume from loud to inaudible and anything in between. Precision electronics: accepts up to 14-gauge wiring, includes heavy duty electronic components designed to provide low distortion and a ruler flat frequency response.

Connect up to 8 pairs of speakers to a single 8-ohm-rated stereo amplifier requires 1 volume control per speaker pair.

More information about Russound ALT126R #ad


Similar products



OSD Audio - OVC100 Impedance Matching 100W Rotary Knob Style Outdoor Weather Resistant Housing Volume Control - Grey

#ad
#ad
OSD Audio OVC100 Grey #ad - The osd-audio ovc100 is a sturdy outdoor volume control with a 100W power rating that can control 1 to 8 pairs of outdoor speakers simultaneously with impedance matching. Convenient volume control: a decora style impedance-matching volume control kit for whole house audio systems that allows you to control speaker volume independently in each audio zone.

Maintains high fidelity: rated at 100 watts peak, maintains the full hi-fi audio frequency response with no low frequency roll-off and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. Impedance matching protection: installs easily and works with almost any audio system, includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging the amplifier.

Decora style design: includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point vertical slider to adjust volume from loud to inaudible and anything in between. Precision electronics: accepts up to 14-gauge wiring, includes heavy duty electronic components designed to provide low distortion and a ruler flat frequency response.

OSD Audio - OVC100 Impedance Matching 100W Rotary Knob Style Outdoor Weather Resistant Housing Volume Control - Grey #ad - Connect up to 8 pairs of speakers to a single 8-ohm-rated stereo amplifier requires 1 volume control per speaker pair. Power rating: 100 watts peak 20Hz-20kHz, 8 ohms Stereo. Easy-access impedance-matching switch! The weather-resistant housing can take outdoor climates, and the OVC100 includes mounting options for PVC pipe or on-wall mounting, plus an easy access impedance-matching switch.

More information about OSD Audio OVC100 Grey #ad


Similar products



AudioSource AE100VC Impedance Matching Volume Control

#ad
#ad
Audio Source AE100VC #ad - 39 db of attenuation. Selectable impedance matching jumper settings. Power rating: 100 watts peak 20Hz-20kHz, 8 ohms Stereo. Includes metal mounting plate and color matched plastic. Convenient volume control: a decora style impedance-matching volume control kit for whole house audio systems that allows you to control speaker volume independently in each audio zone.

Maintains high fidelity: rated at 100 watts peak, maintains the full hi-fi audio frequency response with no low frequency roll-off and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. Impedance matching protection: installs easily and works with almost any audio system, includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging the amplifier.

Decora style design: includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point vertical slider to adjust volume from loud to inaudible and anything in between. Precision electronics: accepts up to 14-gauge wiring, includes heavy duty electronic components designed to provide low distortion and a ruler flat frequency response.

AudioSource AE100VC Impedance Matching Volume Control #ad - Connect up to 8 pairs of speakers to a single 8-ohm-rated stereo amplifier requires 1 volume control per speaker pair. 12-position rotary switch. The ae100vc package includes a metal mounting bracket, and three sets of color matched knobs, plastic inserts, and screws.100w per channel max impedance matching volume control.

More information about Audio Source AE100VC #ad


Similar products



OSD Audio AB12 In-Wall A/B Speaker Selector Switch, White, Almond, and Ivory

#ad
#ad
OSD Audio AB12 #ad - Selectable impedance matching jumper settings. Dimensions: 3 1/4" x 3" 4 3/8" L x W x H. Selectable impedance matching jumper settings. Wiring requirement: 14-16 gauge wire. Frequency response: 20Hz - 20KHz. Easy-access impedance-matching switch! Adjustable impedance magnification 1x, and 8x with easy-to-use, 2x, 4x, front-mounted selection switch.

4-ohm amp: up to 16 pairs of 8-ohm speakers or 8 pairs of 4-Ohm speakers. Removable right angle solder-less terminals. It is compatible with any speaker and/or volume control combination. 100w per channel max impedance matching volume control. Whole-house volume control: a complete decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office.

OSD Audio AB12 In-Wall A/B Speaker Selector Switch, White, Almond, and Ivory #ad - Decora style design: installs easily and works with almost any audio system, includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible. Includes adjustable jumpers: rated at 100 watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle.

Impedance matching protection: Includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging your receiver or amplifier. A complete vc kit: designed to provide low distortion and a ruler flat frequency response, accepts up to 14-gauge wiring and includes junction box and screws.

Please update our item.

More information about OSD Audio AB12 #ad


Similar products



250ft 14AWG 4 Conductors 14/4 CL2 Rated Loud Speaker Cable Wire, Pull Box For In-Wall Installation 14AWG / 4 Conductors, 250ft

#ad
#ad
Cables Direct Online 4330098827 #ad - The advantage of the CCA speaker wire is lighter and more flexible than copper wire. Mounting: Fits most standard single-gang junction boxes. The cost of cca vs oxygen free copper is much lower and you can enjoy the same functions and reliability as copper wire without paying the extra cost for the installation.

Tough, yet flexible white insulated jacket is market with a stripe on one side for polarity and is marked with FT count for easy installation. The 99 strands 016mm conductors provide exceptional performance, sound quality for professional speaker and audio connections. Wiring requirement: 14-16 gauge wire.

250ft 14AWG 4 Conductors 14/4 CL2 Rated Loud Speaker Cable Wire, Pull Box For In-Wall Installation 14AWG / 4 Conductors, 250ft #ad - Selectable impedance matching jumper settings. 100-watt power handling. Convenient volume control: a decora style impedance-matching volume control kit for whole house audio systems that allows you to control speaker volume independently in each audio zone. Maintains high fidelity: rated at 100 watts peak, maintains the full hi-fi audio frequency response with no low frequency roll-off and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously.

Impedance matching protection: installs easily and works with almost any audio system, includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging the amplifier. Decora style design: includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point vertical slider to adjust volume from loud to inaudible and anything in between.

Precision electronics: accepts up to 14-gauge wiring, includes heavy duty electronic components designed to provide low distortion and a ruler flat frequency response.

More information about Cables Direct Online 4330098827 #ad


Similar products



SVC300 Impedance Matching 300W In-Wall Rotary Knob Style Home Theater Speaker Volume Control Switchable Decora Plates - White, Ivory, Almond - OSD Audio

#ad
#ad
OSD Audio SVC300 #ad - The advantage of the CCA speaker wire is lighter and more flexible than copper wire. Now avaliable in black & brown* more features  control volume from any room wall-mounted volume controller works with any audio/video system Low distortion and ruler flat frequency response A Little about Volume Controls Not every installation will require an impedance-matching volume control but it's important to know when you need it.

Selectable impedance matching jumper settings. Most impedance-matching volume controls feature three standard settings: 1/2x, 4x and 8x, while some add a 16-ohm setting like our VMS series. As you can see by the many reviews, the result is a blend of transparency and functionality, with low distortion and ruler flat frequency response.

Cca copper clad aluminum - cca wire offers the same signal frequency and reliability in terms of corrosion resistance to copper wire. The cost of cca vs oxygen free copper is much lower and you can enjoy the same functions and reliability as copper wire without paying the extra cost for the installation.

SVC300 Impedance Matching 300W In-Wall Rotary Knob Style Home Theater Speaker Volume Control Switchable Decora Plates - White, Ivory, Almond - OSD Audio #ad - Tough, yet flexible white insulated jacket is market with a stripe on one side for polarity and is marked with FT count for easy installation. The 99 strands 016mm conductors provide exceptional performance, sound quality for professional speaker and audio connections. Weather-resistant - resistant to rain, snow, heat - Can withstand -50/ +130 degree weather.

Dimensions: 1" w x 2 3/4 h x 1 3/4" D.

More information about OSD Audio SVC300 #ad


Similar products



Satmaximum 500ft Speaker Cable 16 AWG Wire Cl2 in Wall Bulk 16/2 Gauge 2 Conductor Audio

#ad
#ad
Satmaximum FBA_4330098790 #ad - Weather-resistant - resistant to rain, snow, heat - Can withstand -50/ +130 degree weather. 14/4 cable rated cl2 for in-wall use, complies with fire safety for use inside the walls of residential class buildings. 12-position rotary switch. Dimensions: 1" w x 2 3/4 h x 1 3/4" D. The advantage of the CCA speaker wire is lighter and more flexible than copper wire.

Dimensions: 3 1/4" x 3" 4 3/8" L x W x H. Installation: accepts up to 14-gauge speaker wire - Fits in a standard gang box with a depth of 2. 9". Professional grade audio cable for exceptional performance. 39 db of attenuation. Power handling: 42 watts RMS per Channel 126 watts peak. 16 awg 2 superior quality stranded CCA conductors.

Satmaximum 500ft Speaker Cable 16 AWG Wire Cl2 in Wall Bulk 16/2 Gauge 2 Conductor Audio #ad - Cca copper clad aluminum - cca wire offers the same signal frequency and reliability in terms of corrosion resistance to copper wire. Pop-free control - rotary Knob design delivers 12-step rotation pop-free control for a wide range of listening volumes. The cost of cca vs oxygen free copper is much lower and you can enjoy the same functions and reliability as copper wire without paying the extra cost for the installation.

Tough, yet flexible white insulated jacket is market with a stripe on one side for polarity and is marked with FT count for easy installation. The 99 strands 0

More information about Satmaximum FBA_4330098790 #ad


Similar products



500ft 16AWG 4 Conductors 16/4 CL2 Rated Loud Speaker Cable Wire, Pull Box For In-Wall Installation 16AWG / 4 Conductors, 500ft

#ad
#ad
Cables Direct Online 43235-210845 #ad - Dimensions: 3 1/4" x 3" 4 3/8" L x W x H. 16/4 cable rated cl2 for in-wall use, complies with fire safety for use inside the walls of residential class buildings. Selectable impedance matching jumper settings. Wiring requirement: 14-16 gauge wire. Selectable impedance matching jumper settings. Professional grade audio cable for exceptional performance, Ideal for digital/analog speaker and home theater systems.

Power rating: 100 watts peak 20Hz-20kHz, 8 ohms Stereo. Whole-house volume control: a complete decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office. Decora style design: installs easily and works with almost any audio system, includes three decora style trim plates in white, ivory or almond to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible.

500ft 16AWG 4 Conductors 16/4 CL2 Rated Loud Speaker Cable Wire, Pull Box For In-Wall Installation 16AWG / 4 Conductors, 500ft #ad - Includes adjustable jumpers: rated at 100 watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle. Impedance matching protection: Includes selectable impedance matching so parallel connections of multiple volume controls can be installed without damaging your receiver or amplifier.

A complete vc kit: designed to provide low distortion and a ruler flat frequency response, accepts up to 14-gauge wiring and includes junction box and screws. Please update our item. Power handling: 300w per Channel - Perfect for 1 pair of speakers.

More information about Cables Direct Online 43235-210845 #ad


Similar products