Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4″ x 4-5/8″, 5 Microns

#ad
#ad
Pentair Industries EP-BB #ad - Water filters are used in a wide range of applications, and irrigation, industrial processes, swimming pools, including drinking water purification, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately.

They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm4. 3 psichlorine reduction capacity22, 000 gallons at 2 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w9-3/4 x 4-5/8 inches 248 x 118 mmMaterials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.

Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns #ad - The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

The filter will reduce free available chlorine fAC at 2 parts per million ppm by at least 90% in up to 22, 000 gallons at a flow rate of 2 gallons per minute gpm. Nominal filtration rating of 5 microns.

More information about Pentair Industries EP-BB #ad

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

#ad
#ad
Pentair Industries DGD 5005 #ad - It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. This pentek dgd-5005 spun polypropylene filter cartridge reduces sand, silt, and rust particles in residential, scale, commercial, and municipal drinking water.

The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" #ad - Specificationsnominal filtration rating pre-filter50 micronsNominal filtration rating post-filter5 micronsInitial pressure drop at 10 gpm. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C.

More information about Pentair Industries DGD 5005 #ad


Similar products



Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

#ad
#ad
Pentair Industries DGD-2501 #ad - It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This pentek dgd-2501 spun polypropylene filter cartridge reduces sand, silt, and rust particles in residential, scale, commercial, and municipal drinking water.

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" #ad - This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water. Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 10 gpm.

More information about Pentair Industries DGD-2501 #ad


Similar products



Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings

#ad
#ad
Pentair Industries TIER1-OR-100 #ad - Material: Buna-N. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Package Quantity: 1 Piece.

Spun polypropylene for resistance to chemicals and bacteria. This o-ring fits pentek big blue filter housings, such as drinking water purification, and industrial processes, swimming pools, which are used in various applications, among others. Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes.

Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings #ad - It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber Buna-N for flexibility and resistance to abrasion and tearing. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

Spun polypropylene for resistance to chemicals and bacteria. For use with: pentek, pentair Water - Big Blue Housings Only. Water filters are used in a wide range of applications, and irrigation, including drinking water purification, industrial processes, swimming pools, among others.

More information about Pentair Industries TIER1-OR-100 #ad


Similar products



Pentek ECP20-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 20 Microns

#ad
#ad
Pentair Industries ECP20-BB #ad - It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 20 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. This pentek ecp20-bb pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water.

The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has a nominal filtration rating of 20 microns at an efficiency of 85%. This pleated cellulose polyester filter cartridge is for use in various applications, irrigation, and industrial processes, including drinking water purification, among others.

Pentek ECP20-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 20 Microns #ad - Specificationsnominal filtration rating20 micronsInitial pressure drop at 20 gpm.

More information about Pentair Industries ECP20-BB #ad


Similar products



Pentek ECP5-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 5 Microns

#ad
#ad
Pentair Industries ECP5-BB #ad - It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 20 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength.

Pentek ECP5-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 5 Microns #ad - This pleated cellulose polyester filter cartridge is for use in various applications, and industrial processes, including drinking water purification, irrigation, among others. Specificationsnominal filtration rating5 micronsInitial pressure drop at 20 gpm. This pentek ecp5-bb pleated cellulose polyester filter cartridge reduces sand, silt, rust, dirt, and scale particles in residential and commercial water.

It has a nominal filtration rating of 5 microns at an efficiency of 85%.

More information about Pentair Industries ECP5-BB #ad


Similar products



Pentek 150296 SW-3 Wrench for #10 Big Blue Housings

#ad
#ad
Pentair Industries SW-3 #ad - Reduces sand, dirt, rust, silt, and scale particles in residential and commercial water. Nominal filtration rating of 5 microns. For use with: pentek, pentair Water - Big Blue Housings Only. Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. Material: Buna-N. It is made of strong plastic.

Type: O-Ring. Wrench for loosening filter housing sumps. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

Pentek 150296 SW-3 Wrench for #10 Big Blue Housings #ad - Spun polypropylene for resistance to chemicals and bacteria. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. This wrench fits the sumps of pentek #10 big Blue filter housings, which are used in a wide variety of applications, and industrial processes, irrigation, including drinking water purification, among others.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentair Industries SW-3 #ad


Similar products



Pentek EPM-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 10 Microns

#ad
#ad
Pentair Industries EPM-BB #ad - Type: O-Ring. Made of strong plastic. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. The filter will reduce free available chlorine fAC at 2 parts per million ppm by at least 90% in up to 15, 000 gallons at a flow rate of 2 gallons per minute gpm.

Material: Buna-N. It has a nominal 85% filtration rating of 10 microns. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Package Quantity: 1 Piece. For use with: pentek, pentair Water - Big Blue Housings Only. Fits pentek #10 Big Blue housing sumps. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%.

Pentek EPM-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 10 Microns #ad - H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes.

Spun polypropylene for resistance to chemicals and bacteria.

More information about Pentair Industries EPM-BB #ad


Similar products



Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter

#ad
#ad
Pentek CFB-Plus10BB #ad - Type: O-Ring. Material: Buna-N. Reduces sand, rust, silt, dirt, and scale particles in residential and commercial water. Nominal filtration rating of 5 microns. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water.

Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. It offers the same benefits with even greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge.

Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter #ad - Initial pressure drop of 5 psi at a flow rate of 2 gpm. Made of strong plastic. Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. The fibredyne cfb-plus10bb big blue water filter cartridges are an enhanced version of our CFB product. Greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge combines the benefits of both a sediment filter and a carbon block into a single cartridge Offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks Will not release fines into the effluent stream Manufactured entirely from FDA-compliant materials Ideal choice for a wide range of residential food service commercial and industrial applications Pentek 10" BB 255677-43 CFB-Plus10BB Fibredyne Filter Specifications 255677-43 CFB-Plus10BB.

Cfb-plus series products are modified molded blocks manufactured using our proprietary Fibredyne technology.

More information about Pentek CFB-Plus10BB #ad


Similar products



Pentek 155101-43 R30-Bb 9-3/4" 30mic Hd Pleated Filter Cartridges

#ad
#ad
B001VXU82U R30-BB #ad - This pleated polyester filter cartridge is for use in various applications, irrigation, including drinking water purification, and industrial processes, among others. Specificationsnominal filtration rating30 micronsInitial pressure drop at 10 gpm. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. This pentek r30-bb pleated polyester filter cartridge reduces sand, silt, dirt, rust, and scale particles in residential and commercial water.

More information about B001VXU82U R30-BB #ad


Similar products



Pentek 150469 3/4" #10 Big Blue Filter Housing

#ad
#ad
Pentair Industries 3/4" #10 BB Black/Blue HFPP w/PR #ad - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Wrench for loosening filter housing sumps. This filter housing meets national sanitation foundation/american National Standards Institute NSF/ANSI standard 42 for quality assurance, and is for use in various high-flow applications, food service, and irrigation, including residential drinking water filtration, among others.

Specificationsfilter cartridge size h x w sold separately10 x 4-1/2 inches 254 x 114 mmInitial pressure drop at 15 gpm2 psiMaximum temperature100 degrees F 37. 8 degrees cmaximum pressure100 psimaximum dimensions h x w13-1/8 x 7-1/4 inches 333 x 184 mmmaterials and structural integrity certificationNSF/ANSI standard 42H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Pentek 150469 3/4" #10 Big Blue Filter Housing #ad - Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes. Fits pentek #10 Big Blue housing sumps. Initial pressure drop of less than 1 psi at a flow rate of 20 gpm. Large filter housing for high-flow and heavy sediment applications.

The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge.

More information about Pentair Industries 3/4" #10 BB Black/Blue HFPP w/PR #ad


Similar products