As an Amazon Associate I earn from qualifying purchases.
Record workout data with the Wahoo Fitness app and automatically upload data to your favorite training platform like Strava. Integrated with bluetooth and ant+, tablets, Garmin, RPM sensors connect to smartphones, polar, and bike computers by Wahoo, and more.

Connection when using a smart phone app, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid.

Best design and support – total weight is 9. 5g, easy install.
Wahoo app can’t tracking 2 data in the same time even you have 2 sensors. Wireless and non-magnetic, IP67 waterproof for rainny riding. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. It comes with rubber pad and different size O-ring to help you better fix it on bike.


If you need both data at once, please purchase two. Support ant+ & bluetooth 4. 0xoss sensors are compatible with all devices that support ant+ protocol, bryton, such as Garmin, XOSS G+ and other bike computers.
Please ask the technical support of your APP and ANT+ device to confirm if it is compatible. Please see the faq below for more notes on installation, and data before purchasing. Only 10g, very light and easy to carry. Please check the tutorial video on the product detail page. Please watch faq below for additional notes before purchasing, and feel free to contact us with questions.

Lightweight and easy to installsize only 38. 5mm×38mm×12mm & weight only 105g. If you want to confirm compatibility with your app, please send us a message on Amazon. Build qualityv4 cadence sensor is waterproof, battery life up to 500 hours / wireless signal strength up to 20 feet.
No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape. Built-in replaceable cR2032 button battery, use the coin to unscrew and replace the battery. Wide compatibilitythe rpm cadence sensor is compatible with most mainstream ios and android fitness apps: Zwift, Peloton, Tacx, Cyclemeter, RideWithGPS, Rouvy, TrainerRoad, Openrider, etc.

Widely compatible -the cycling sensor campatible with most of mainstream fitness APPs, Openrider, Zwift, Peloton, Cyclemeter, E-lite HRV, RideWithGPS, Uhr, Endomondo, such as Wahoo Fitness, etc. Ip67 waterproof -you can cycling with the cycling cadence sensor even on rainy days, enjoy your cycling every day in all weather.

Unsuitable installation notice: some bikes have large flat fork spans, or most indoor bicycles, spinning, and the trainer, which is not suitable for installing this product.
Speed and cadence 2 in 1accurately track speed, cadence and distance in real time, and transmit it to your smartphone or bike computer via Bluetooth. It does not fit for spin bike. 3, there are two small triangles on the sensor. Please make sure that the triangle is aligned with the center of the cadence magnet and speed magnet. 2, after installation, please make sure that the gap between the corresponding speed sensor and cadence sensing part and the corresponding magnets does not exceed 2cm.

0 and ant+ to your iPhone, Android and/or bike computer. Also works with the free wahoo fitness app, ipad, ipad 3rd gen and newer, Strava, iPhone 4S and newer, iPod, and more! Supported iDevices: iPhone, cyclemeter, ridewithgps, mapMyRide, iPod Touch 5th gen.

If you want to confirm compatibility with your app, please send us a message on Amazon. Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth.
Please remember to remove the battery insulation sheet before installation. Build qualityv2 cadence and speed sensor is waterproof, sweatproof and dustproof. If you have any questions, please contact us and LIVLOV always here to help you solve your problems quickly and accurately, offer you excellent customer services. Bluetooth & ant+ dual-protocoluse the livlov v2 sensor to accurately track your cycling and speed cadence in real-time.
1. Wahoo Fitness
#ad
Wahoo RPM Cycling Cadence Sensor
#adWahoo Fitness #ad - Works with 50+ smartphone apps including wahoo fitness, Cyclemeter, Peloton iOS only, Trainerroad, Sufferfest, Komoot, RideWithGPS, Zwift, Rouvy, mapMyRide, Fulgaz, Kinomap.Record workout data with the Wahoo Fitness app and automatically upload data to your favorite training platform like Strava. Integrated with bluetooth and ant+, tablets, Garmin, RPM sensors connect to smartphones, polar, and bike computers by Wahoo, and more.
More information #ad
Attaches to your bike’s crank arm or shoe mounts included. Lightweight and easy to install – NO MAGNETS. Track and capture real-time cycling cadence on your bike computer or smartphone with compatible training apps.Brand | Wahoo Fitness #ad |
Manufacturer | Wahoo Fitness (Sports & Outdoors) #ad |
Height | 0.5 Inches |
Length | 6.5 Inches |
Weight | 0 Pounds |
Width | 4 Inches |
Part Number | WFPODCAD2 |
Model | WFPODCAD2 |
More information #ad
2. Magene
#ad
Magene S3 Cadence/Speed Sensor
#adMagene #ad - Mode 1 sensor can only select one mode speed or Cadence at the one time. So you need 2 sensors to test both speed and cadence. 1 for speed, 1 for cadence. Device when using the bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently; When using ANT+ protocol it can be connected to multiple devices at the same time.Connection when using a smart phone app, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid.
More information #ad
Battery remove the insulating sheet of the pre-installed battery before usage; re-install the battery to switch between the speed and cadence mode. Hibernation s3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.Brand | Magene #ad |
Manufacturer | Magene #ad |
Part Number | S3 |
More information #ad
3. CooSpo
#ad
Bluetooth ANT+ Cycling Cadence Sensor Bike Speed Sensor, Wireless RPM Bicycle Cadence Sensor for Bike Computer/Rouvy/Zwift/Openrider/Peloton/Wahoo/CooSporide, CooSpo Cadence and Speed Sensor
#adCooSpo #ad - Speed sensor mounts on the axle with red LED light up for three seconds on panel. Cadence or speed sensor – switch the battery, it will switch between rpm cadence and speed mode. Two modes can nOT working at the same time. Bluetooth & ant+ compatible - compatible with wireless Bluetooth and ANT+ dual mode technology, it allows you to connect and display data on both smartphones and GPS bike computers in the same time.Best design and support – total weight is 9. 5g, easy install.
More information #ad
Coospo offer 1 year warranty once the sensor shipped. Rpm cycling sensor - tracking and provide real-time cycling cadence or speed data on your bike computer or smartphone apps with CooSpo bike RPM cycling sensor. App compatible & battery life - work with popular training app including zwift, peloton, Rouvy, TrainerRoad CooSporide, Openrider, RidewithGPS, CR2032 battery lasts up to 500 hours. Wahoo app can’t tracking 2 data in the same time even you have 2 sensors. Wireless and non-magnetic, IP67 waterproof for rainny riding. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. It comes with rubber pad and different size O-ring to help you better fix it on bike.
Brand | CooSpo #ad |
Part Number | 8541746322 |
Model | BK467 |
Warranty | 12 MONTH WARRANTY |
More information #ad
4. Garmin
#ad
Bike Sensor to Monitor Pedaling Cadence, Garmin Cadence Sensor 2
#adGarmin #ad - Ant+ connectivity and bluetooth low energy technology let you send cadence data to our Garmin Connect online community and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.More information #ad
Compatible with multiple Garmin devices. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.Brand | Garmin #ad |
Manufacturer | Garmin #ad |
Height | 0.25 Inches |
Length | 1.5 Inches |
Weight | 0.11 Pounds |
Width | 1 Inches |
Part Number | 010-12844-00 |
Model | 010-12844-00 |
Warranty | 1 year limited warranty |
More information #ad
5. XOSS
#ad
XOSS X1 Speed Cadence Sensor Wireless Bike Speedometer Power Meter Bike Trainer Bike Computer Use Indoor Outdoor Bike Use Zwift Peleton OpenRider- 1 Pack
#adXOSS #ad - Waterproof and light, easy to installip67 level waterproof, you can ride when rain day. Powerful xoss app supportxoss cadence sensor are supported by the powerful xoss app with accurate data and are also compatible with most fitness APP. Notesingle speed cadence sensor can switch between speed and cadence mode, connection, presenting one data at a time.If you need both data at once, please purchase two. Support ant+ & bluetooth 4. 0xoss sensors are compatible with all devices that support ant+ protocol, bryton, such as Garmin, XOSS G+ and other bike computers.
More information #ad
Note: the cadence and speed sensors cannot be used with the XOSS Bike Computer and XOSS APP for indoor training, it can be used outdoors. And supports bluetooth connection with apps like Openrider and bike trainer apps like Zwift, Tacx and Bkool. Please ask the technical support of your APP and ANT+ device to confirm if it is compatible. Please see the faq below for more notes on installation, and data before purchasing. Only 10g, very light and easy to carry. Please check the tutorial video on the product detail page. Please watch faq below for additional notes before purchasing, and feel free to contact us with questions.
Brand | XOSS #ad |
Manufacturer | XOSS #ad |
More information #ad
6. LIVLOV
#ad
LIVLOV V4 Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Wireless Bicycle Cadence Sensor IP67 Waterproof for Zwift Elite HRV Endomondo Peloton Bike Computers
#adLIVLOV #ad - Noteremove the insulating sheet of the pre-installed battery before usage, re-install the battery to switch between the speed and cadence mode. Easy to replace, sweatproof and dustproof. If you have any questions, please contact us. Please remember to remove the battery insulation sheet before installation.Lightweight and easy to installsize only 38. 5mm×38mm×12mm & weight only 105g. If you want to confirm compatibility with your app, please send us a message on Amazon. Build qualityv4 cadence sensor is waterproof, battery life up to 500 hours / wireless signal strength up to 20 feet.
More information #ad
Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth. Unlimited cadence sensor battery replacements and one-year warranty. Bluetooth & ant+ dual-protocoluse the livlov v4 sensor to accurately track your cycling cadence in real-time. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape. Built-in replaceable cR2032 button battery, use the coin to unscrew and replace the battery. Wide compatibilitythe rpm cadence sensor is compatible with most mainstream ios and android fitness apps: Zwift, Peloton, Tacx, Cyclemeter, RideWithGPS, Rouvy, TrainerRoad, Openrider, etc.
Brand | LIVLOV #ad |
Manufacturer | LIVLOV #ad |
Height | 0.39 Inches |
Length | 1.57 Inches |
Weight | 0.02 Pounds |
Width | 1.5 Inches |
Part Number | V4 |
More information #ad
7. moofit
#ad
Bluetooth / ANT+ IP67 Waterproof Wireless RPM Cycling Cadence Sensor for Wahoo/Zwift /OpenRider/Endomondo/Peloton MooFit app Unavailable, moofit Bike Cadence Sensor
#admoofit #ad - Ble 4. 0 & ant + technology -connect the cadence sensor to your bike computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth.Widely compatible -the cycling sensor campatible with most of mainstream fitness APPs, Openrider, Zwift, Peloton, Cyclemeter, E-lite HRV, RideWithGPS, Uhr, Endomondo, such as Wahoo Fitness, etc. Ip67 waterproof -you can cycling with the cycling cadence sensor even on rainy days, enjoy your cycling every day in all weather.
More information #ad
Easy to install -no magnets needed, the bluetooth / ant+ cadence sensor attaches to your bike’s crank arm. Real-time data -tracking cadence data in real-time on your bike computer or smartphone with compatible training apps.Brand | moofit #ad |
Manufacturer | Wantacme #ad |
Height | 0.39 Inches |
Length | 1.46 Inches |
Weight | 0.02 Pounds |
Width | 1.18 Inches |
More information #ad
8. MEILAN
#ad
MEILAN C3 Bluetooth Speed and Cadence Sensor Speed&Cadence Sensor Two in one Wireless Speed Sensor Bike Cadence Sensor for Bike Computer and apps Zwift
#adMEILAN #ad - Installation notes of sensor1, the sensor and magnet must be fixed firmly. Compatible with third-party appswork with most popular cycling apps which is you favorite – MEILAN, TrainerRoad, Cyclemeter, MapMyRide, Zwift, Peloton, RideWithGPS, and more. Work with zwift for indoor trainer c3 works with most bikes and frame sizes, it can be used for indoor training with most bikes which is inserted into the indoor trainer platforms.Unsuitable installation notice: some bikes have large flat fork spans, or most indoor bicycles, spinning, and the trainer, which is not suitable for installing this product.
More information #ad
Compatible with bike computer and sport watch via bluetooth 4. 0c3 speed and cadence sensor only supports Bluetooth connection, such as Garmin, Bryton, and can be compatible with bike computers and sports watches. Capture speed and cadence on your favorite indoor cycling platform and display on your phone or PC via Zwift app. Speed and cadence 2 in 1accurately track speed, cadence and distance in real time, and transmit it to your smartphone or bike computer via Bluetooth. It does not fit for spin bike. 3, there are two small triangles on the sensor. Please make sure that the triangle is aligned with the center of the cadence magnet and speed magnet. 2, after installation, please make sure that the gap between the corresponding speed sensor and cadence sensing part and the corresponding magnets does not exceed 2cm.
Brand | MEILAN #ad |
Manufacturer | MEILAN #ad |
Height | 1.4 Inches |
Length | 3.8 Inches |
Weight | 0.04 Pounds |
Width | 1 Inches |
Part Number | MLCAC3 |
More information #ad
9. Wahoo Fitness
#ad
Bluetooth / ANT+, Wahoo Blue SC Speed and Cadence Sensor
#adWahoo Fitness #ad - Lightweight and easy to install, comes with both rubber band and zip tie mounts. Universal fit - works with most bikes and frame sizes. Connects wirelessly via bluetooth 4.0 and ant+ to your iPhone, Android and/or bike computer. Also works with the free wahoo fitness app, ipad, ipad 3rd gen and newer, Strava, iPhone 4S and newer, iPod, and more! Supported iDevices: iPhone, cyclemeter, ridewithgps, mapMyRide, iPod Touch 5th gen.
More information #ad
Track and capture real-time speed, android, cadence and distance on your iPhone, and bike computer. The magnet will have to pass within 1/8 inch to get a reading. Works with zwift and trainerroad! capture cadence on your favorite indoor cycling platform, No tangled wires on your bike to connect the sensor to your device. Note:kindly refer the user manual before usage of the product.Brand | Wahoo Fitness #ad |
Manufacturer | Wahoo Fitness (Sports & Outdoors) #ad |
Height | 1.57 Inches |
Length | 6.69 Inches |
Weight | 0.22 Pounds |
Width | 4.72 Inches |
Part Number | WFBTSC02 |
Model | WFBTSC02 |
More information #ad
10. LIVLOV
#ad
Bluetooth ANT+ Wireless Cadence Sensor IP67 Waterproof Cycling RPM Sensor Compatible with Wahoo Zwift Elite HRV Endomondo Peloton Bike Computers, LIVLOV V2 Bike Cadence and Speed Sensor
#adLIVLOV #ad - Built-in replaceable cr2032 button battery, battery life up to 500 hours / wireless signal strength up to 20 feet. Lightweight and easy to installsize only 38. 5mm×38mm×12mm & weight only 105g. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or wheel hub through the included rubber-elastic rings and double-sided tape.If you want to confirm compatibility with your app, please send us a message on Amazon. Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth.
More information #ad
Easy to replace, use the coin to unscrew and replace the battery. Unrivaled warrantyunlimited cadence and speed sensor battery replacements and one-year warranty. Wide compatibilitythe rpm cadence and speed sensor is compatible with most mainstream ios and Android fitness apps: Zwift, Tacx, TrainerRoad, RideWithGPS, Peloton, Cyclemeter, Rouvy, Openrider, etc. Please remember to remove the battery insulation sheet before installation. Build qualityv2 cadence and speed sensor is waterproof, sweatproof and dustproof. If you have any questions, please contact us and LIVLOV always here to help you solve your problems quickly and accurately, offer you excellent customer services. Bluetooth & ant+ dual-protocoluse the livlov v2 sensor to accurately track your cycling and speed cadence in real-time.
Brand | LIVLOV #ad |
Manufacturer | LIVLOV #ad |
Height | 0.39 Inches |
Length | 1.57 Inches |
Width | 1.5 Inches |
Warranty | 1 Year |
More information #ad