As an Amazon Associate I earn from qualifying purchases.
IHEX #ad - Custom extra long 6 foot Length 1. 82 can be cut to size for all your applications. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.
CocoMocart #ad - The fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 9. 8 foot length 3m can be cut to size for all your applications.
Fuel line:1/4 inch inside diameter 064 cm and 1/3 inch outside diameter 08cm；hose clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.
NEW DAFU #ad - The package includes:1×5 feet1. 5m 1/4" 6mm id fuel line, the dimensions of the two parts are compatible with each other, 6 × 2/5" ID 65 Manganese steel spring hose clamps, You can use them directly without additional purchases. For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines.
Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, it will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, Which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will always accompany your vehicle to arrive the destination safely.
Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is nylon braided, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is NBR, and resist various corrosive liquids. The thickened tube makes you feel at ease, acid and alkali resistance, which can increase oil resistance, No worries about leakage.
YAMAKATO #ad - Package includes one 10 feet fuel line and 20pcs Hose Clamps. Strechy 2 layers compound structure, heavy duty. The hose clamp is 10mm inner diameter, made of 1mm thinkness steel. For gas, vapor emission lines and vacuum smog control.
Fuel lines, not for engines with fuel pumps. 10 ft in length. 1/4 in 6. 4mm inner diameter and 7/16 inch outer diameter 104mm. The fuel lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.
Please note it's a non pressure fuel line, diesel etc.
ACDelco #ad - Intended for use with fuels where MTBE concentrations are no greater than 15% by volume. Nitrile tube that is spiral reinforced for enhanced durability. At ambient temperatures. Warning: do not use for pressure lines on fuel injected engines or for cooling system applications.
dojobkinb #ad - Wide applications rubber fuel line widely used in the fuel system, PCV system, steam emission, oil cooling, please check the pressure of application before purchase.
Strong and durable nylon braided fuel hose working temperature range: -40°f to +300°f, maximum working pressure: 290 PSI, Burst pressure: 1160 PSI. Applicable fuel line can work with diesel/ biodiesel/ gasoline/ Oil/ grease/ water and air, etc.
IZOKEE #ad - The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. You do not need to purchase those part extra. Oil resistant, cold-resistant and ethanol tolerance. Tight clamping force prevents liquid leakage.
Upgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps. 6 foot / 2 m hose can be cut to size for all your applications. Wall thickness is 2. 94mm. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.
Hose clampsmade of 65mn spring Steel, durable and can be reused. Wide applicationfits selected briggs & stratton, john deere, Kohler, Oregon, Kawasaki, kubota engines that use this type filter for motorcycle, Husqvarna, Craftsman, Simpson, lawnmower, Stens, gravley, power equipment and small engines ect. Fuel filters and hose clamps are required for the use of fuel line.
Tnisesm #ad - 6 foot / 2 m hose can be cut to size for all your applications. Package includes: 6 feet 5/16" id fuel line; 2 pcs x 5/16" in line fuel filters; 10 pcs 15/32''-9/16'' mini fuel Hose Clamps Adjustable. Inner diameter: 8mm; outer diameter: 14mm; adapt to temperature: -30 ° C -120 ° C; Wall thickness: 3.
4mm/013". Fuel filters and hose clamps are required for the use of fuel line. Could save you a lot time to find proper clamp in local market. Oil resistant, cold-resistant and ethanol tolerance.
The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. Designed for conveying gasoline, and bio-diesel, diesel, e-85, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4" or 5/16" fuel lines engines.
RUIDELI #ad - Nbr fuel line usetesting standard: HG/T 3038-2008. Fuel line hose material：inner tube/interlayer: Nitrile rubber synthetic material，Outer tube: synthetic high-strength fiber；Adhesive strength 2.
7kn/m. 1/4 id fuel line nbr 20ft 1/4 inch fuel line hose 4AN 6mm. Features2:applicable temperature range: -30℃-100℃. Fuel line hose uses: agriculture/Mmachinery/Cars/Trucks/ Tractors/ Small Engines.
Features3:working pressure: 20 kg 2000KPA, blasting 60 kg 6000KPA. Features4: it can still maintain good flexibility and bending resistance at low temperatures;Compression resistance，no deformation, aging resistance, oil resistance and oxidation resistance.
1. IHEX
#ad¼ Inch ID Fuel Line for Small Engines 6-Foot Length
#adMore information #ad
For use in mowers tractors snow blowers dirt bikes and just about all small engines. Inch inside diameter. 64 cm and ½ inch outside diameter 1. 27. American made high quality rubber hose max 60 PSI @ 70 F Max Temperature of 257F/93C.| Brand | IHEX #ad |
| Manufacturer | LDR Industries #ad |
| Height | 8 Inches |
| Length | 1.25 Inches |
| Weight | 0.21 Pounds |
| Width | 9 Inches |
| Part Number | 516 JF146 |
More information #ad
2. CocoMocart
#adCocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
#adFuel line:1/4 inch inside diameter 064 cm and 1/3 inch outside diameter 08cm；hose clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.
More information #ad
Package includes:9. 8 feet3m 1/4" id fuel line, 20 X 2/5" ID Hose Clamps. Designed for conveying gasoline, diesel, and bio-diesel, E-85, fuels in mowers tractors snow blowers dirt bikes and just about all small engines. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.| Brand | CocoMocart #ad |
| Manufacturer | Cococart #ad |
| Weight | 0.61 Pounds |
| Part Number | CBF020040PN |
| Model | 2 |
More information #ad
3. LDR Industries
#adLDR Industries 516 F145 5' Bag Fuel Line, 1/4"
#adLDR Industries #ad - Use hose barbs and clamps. Convenient 5-Feet length. Made in usa goodYear / Continental Hose. Ideal for transfer of petroleum products fuel lines for small engines. Abrasion resistant.More information #ad
| Brand | LDR Industries #ad |
| Manufacturer | LDR Industries #ad |
| Height | 9 Inches |
| Length | 8 Inches |
| Weight | 0.21 Pounds |
| Width | 1.25 Inches |
| Part Number | 516 F145 |
| Model | 516 F145 |
More information #ad
4. NEW DAFU
#adNEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol
#adOur fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, it will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, Which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will always accompany your vehicle to arrive the destination safely.
More information #ad
The service life can be up to 9 years, and keep good working condition, 3 times more than the other ordinary fuel lines, no matter what questions you have, So the fuel line will not leak under any circumstances, Don't worry about your vehicle, We will always support you. Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is nylon braided, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is NBR, and resist various corrosive liquids. The thickened tube makes you feel at ease, acid and alkali resistance, which can increase oil resistance, No worries about leakage.
| Brand | NEW DAFU #ad |
| Manufacturer | NEW DAFU #ad |
| Height | 1.5 Inches |
| Length | 9.2 Inches |
| Weight | 0.4 Pounds |
| Width | 7.9 Inches |
| Model | 1/4" Fuel/Gas Line 5 Feet |
More information #ad
5. YAMAKATO
#adYAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose for Kawasaki Kohler Briggs & Stratton Small Gas Diesel Powersports Engines and Generators w/ 20 Clamp Rubber Black
#adFuel lines, not for engines with fuel pumps. 10 ft in length. 1/4 in 6. 4mm inner diameter and 7/16 inch outer diameter 104mm. The fuel lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.
More information #ad
Designed for conveying gasoline, trash water pumps, dirt bikes, snowmobiles, power pressure washers, tao tao, motorcycles, tillers, generators, and bio-diesel fuels in lawn mowers, E-85, marine boat outboardand motors, go karts, mini bikes, utv, tractors, diesel, snow blowers, motor bicycles, ATV, 4 wheelers, pit bikes, just about all small engines. Please note it's a non pressure fuel line, diesel etc.
| Brand | YAMAKATO #ad |
| Manufacturer | Chaoli #ad |
| Height | 0.71 Inches |
| Length | 120 Inches |
| Width | 0.8 Inches |
| Part Number | AYMK081 |
| Model | 1/4 inch id fuel line |
More information #ad
6. ACDelco
#adACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose
#adMore information #ad
Vacuum rating of 24 in/hg for sizes less than 12 in I. D. And 10 in/hg for sizes 12 in to 34 in I. D. Nbr-pvc cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Use an acdelco specialty Premium Fuel Injection Hose MPI for fuel injection applications.| Brand | ACDelco #ad |
| Manufacturer | ACDelco #ad |
| Height | 6 Inches |
| Length | 6.5 Inches |
| Weight | 2.64 Pounds |
| Width | 6 Inches |
| Part Number | 32103 |
| Model | 32103 |
| Warranty | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
7. dojobkinb
#ad10 Feet NBR Fuel Line Hose Black Nylon Steel Oil Gas Fuel Line Hose 3/8 Inch Inside Diameter Suitable for Fuel Systems Engines Tube Hose
#adStrong and durable nylon braided fuel hose working temperature range: -40°f to +300°f, maximum working pressure: 290 PSI, Burst pressure: 1160 PSI. Applicable fuel line can work with diesel/ biodiesel/ gasoline/ Oil/ grease/ water and air, etc.
More information #ad
Premium material premium nylon fiber wire materials, wear resistance and high temperature resistance, long service life, perfect racing accessories for fuel injection. Professional oil resistant dn8mm 20bar maximum w. P. Size id: 3/8" 10mm, od: 2/3 " 17mm, length: 10FT.| Brand | dojobkinb #ad |
| Manufacturer | dojobkinb #ad |
More information #ad
8. IZOKEE
#adIZOKEE 1/4" Inch ID Fuel Line Set, 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
#adUpgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps. 6 foot / 2 m hose can be cut to size for all your applications. Wall thickness is 2. 94mm. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.
More information #ad
Fuel filterfilter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power. Hose clampsmade of 65mn spring Steel, durable and can be reused. Wide applicationfits selected briggs & stratton, john deere, Kohler, Oregon, Kawasaki, kubota engines that use this type filter for motorcycle, Husqvarna, Craftsman, Simpson, lawnmower, Stens, gravley, power equipment and small engines ect. Fuel filters and hose clamps are required for the use of fuel line.
| Brand | IZOKEE #ad |
| Manufacturer | IZOKEE #ad |
| Part Number | IZKE-FLCF |
| Model | IZKE-FLCF |
More information #ad
9. Tnisesm
#ad2 Meter / 6-Foot Fuel Line + 2Pcs 1/4 Inch X 5/16 Inch Gas Inline Fuel Filters with Magnet +10 Pcs 15/32''-9/16'' Mini Fuel Hose Clamps Adjustable, Tnisesm 5/16"8MM Inch ID Fuel Line kits
#ad4mm/013". Fuel filters and hose clamps are required for the use of fuel line. Could save you a lot time to find proper clamp in local market. Oil resistant, cold-resistant and ethanol tolerance.
More information #ad
The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. The dimensions of the various components within the kit are compatible. You do not need to purchase those part extra! Easy to use and install;good to replace it at regular intervals, extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. Designed for conveying gasoline, and bio-diesel, diesel, e-85, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4" or 5/16" fuel lines engines.
| Brand | Tnisesm #ad |
| Manufacturer | Tnisesm #ad |
| Part Number | 8mm/5/16" |
More information #ad
10. RUIDELI
#adE85 & E10,Oils, 1/4 id fuel line NBR 10ft 1/4 inch fuel line hose 4AN 6mm for Small Engines Fuel System, etc.
#ad7kn/m. 1/4 id fuel line nbr 20ft 1/4 inch fuel line hose 4AN 6mm. Features2:applicable temperature range: -30℃-100℃. Fuel line hose uses: agriculture/Mmachinery/Cars/Trucks/ Tractors/ Small Engines.
More information #ad
Features1:ozone resistance 40℃, ozone volume fraction 50×10-8 50PPHM, 72H-no cracks. Applicable fuel system： astma grade oil resistance, E10 diesel resistance, E85 gasoline，transmission oil, engine oil antifreeze，Ethanol, brake oil, Lubricants . Features3:working pressure: 20 kg 2000KPA, blasting 60 kg 6000KPA. Features4: it can still maintain good flexibility and bending resistance at low temperatures;Compression resistance，no deformation, aging resistance, oil resistance and oxidation resistance.
| Brand | RUIDELI #ad |
| Manufacturer | RUIDELI OEM #ad |
More information #ad
