Top 8 Angled Foregrip Magpul – Gun Sights

As an Amazon Associate I earn from qualifying purchases.

1. GoEa


GoEa Tactical Lightweight Aluminum Fore Hand Assist, Black M-Iok

GoEa #ad - The long-lasting durability can be counted on. We offer amazon's hassle free replacement or return. Tight tolerance Control with Zero Gap Fitment. Underwent the tightest tolerance Controls for a Secure Fit. 24/7 customer Service. High quality material construction providing maximum corrosion resistance.
BrandGoEa #ad
ManufacturerGoea #ad
Height1 Inches
Length1 Inches
Width1 Inches



CVLIFE Bore Sight Cal 223 5.56mm Rem Gauge Red Dot Boresighter with Two Sets Batteries

CVLIFE #ad - Class iiia laser; less than 5mW. Light and compact. 223 rem boresight. Faster gun zeroing, reduce cartridges and shells wasted. Easy to sit perfectly in the bore; Sturdy brass construction. High accuracy, sighting range is 15 to 100 yards.
BrandCVLIFE #ad
ManufacturerHuihaozi #ad
Part NumberUS5700001

3. Magpul


Magpul MBUS Sight Set GEN 2 Color Flat Dark Earth Front & Rear Included

Magpul #ad - Spring-loaded, folding back-up sight. All mounting hardware included. Same plane dual flip apertures. Lightweight reinforced polymer construction.
BrandMagpul #ad

4. Magpul


Black, Magpul MBUS Pro Offset Front and Rear Flip-Up Backup Sights, 526-525

Magpul #ad - All steel construction; Standard height over bore when deployed, 45 degrees offset right-hand side. Elevation and Windage adjustable with low-profile knob; no tools required. Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion. Made in u. S. A. Positive detents in both the up and down positions.
BrandMagpul #ad
ManufacturerNYLA TOPSTYLE #ad
Height3 Inches
Length6 Inches
Weight0.3 Pounds
Width2 Inches
Part NumberMBUS Pro Offset
ModelMBUS Pro Offset

5. GunSkins


Made in USA, GunSkins Magwell Skin, Easy to Install and Fits AR-15 Lower Receivers, Proveil Victory, 100% Waterproof Non-Reflective Matte Finish, Premium Vinyl Decal

GunSkins #ad - Removeable and leaves behind no residue – this non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply add heat and remove. Designed to fit mil-spec lower receivers on compatible AR-15 rifles and M4 carbines. This is perfect for hunting waterfowl when you are knee deep among the reeds.

The surface will be just as it was prior to installation. Easy to install vinyl wrap – do it yourself installation means you have creative control. The kit includes pieces for the left and right side of a single magwell. No rain, no rust, no worries! Fits any ar-15 lower receiver – magwell skins conform to any shape. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. This automotive grade vinyl is 100% waterproof and non-porous.

Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. No cure time, ready for immediate use! Waterproof non-reflective matte finish – gunskins are made from high-performance, premium vinyl. Install in just a few hours. Switch patterns for different hunting seasons with ease! Lifetime warranty – this gunskins product has a lifetime warranty which covers normal use by the initial user of this product.
BrandGunSkins #ad
ManufacturerGunSkins #ad
Height7 Inches
Length8.75 Inches
Weight2 ounces
Width0.25 Inches
Part Numbermagwell-skin-victory

6. Magpul


Gray, Rear Sight, Magpul Flip-Up Backup Sights

Magpul #ad - Clamps to most any mil-std-1913 picatinny/stanAG 4694 rail and provides the same height-over-bore as standard A2 irons. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Protective wings shield the spring-locking A2 front sight post; Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well.
BrandMagpul #ad
ManufacturerMagpul Industries Corp. #ad
Height4.25 Inches
Length7.5 Inches
Weight0.08 Pounds
Width1 Inches
Part NumberMAG248-GRY

7. Magpul


Magpul Industries Rail Light Right Mount, Black, Small

Magpul #ad - Textured thumb ramp is integrated to provide the user an index point, aiding consistent hand placement and light activation. Includes set of anodized aluminum mounting rings; Models are available to position the light high at 11 o'clock LT, Left side model or one o'clock RT, Right side model.

Fits on any standard 1913 picatinny rail; Available in Right or Left side models; Integrates with the Magpul XTM panels. Positions the light high and cantilevered forward, at the 11 o'clock or 1 o'clock position, to allow a more forward support hand position, keep the light tucked in close to the bore, and to minimize barrel shadow. Constructed of reinforced polymer; includes everything you need to mount Surefire 300 and 600 series Scout Lights, 1913 Picatinny attachment pistol lights, and all light bodies from 075" to 1. 03" in diameter.
BrandMagpul #ad
ManufacturerRSR Group, Inc #ad
Weight0.25 Pounds
Part NumberMAG498-RT-BLK

8. Magpul


Magpul MBUS PRO Offset Steel Backup Sights, Front Sight , Black

Magpul #ad - Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion. All steel construction; steel, rectangular sight post selectable between Match and Standard widths. 040” match width for increased precision;. 060” standard width for maximum visibility. Offset right-hand side. Standard height when deployed, 45 deg. Mounts on any mil-std-1913 picatinny/STANAG 4694 rail. Elevation adjustment knob – no tools required; Positive detents in both the up and down positions as well as on the elevation knob.
BrandMagpul #ad
ManufacturerMagpul #ad
Height1 Inches
Length3 Inches
Weight0.02 Pounds
Width3 Inches
Part NumberMAG525