Top 8 LOOK Keo Classic – Bike Pedals

As an Amazon Associate I earn from qualifying purchases.

1. LOOK

#ad

LOOK Keo Classic 3 Plus Road Pedals, Black

#ad
LOOK #ad - The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution. Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. Its large and wide contact surface provides excellent pedaling stability.

This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out.
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.09 Pounds
Width3 Inches
Part Number22256
Modelclassic plus 3

2. LOOK

#ad

LOOK Keo 2 Max Carbon Road Pedals, Black

#ad
LOOK #ad - The spindle profile of the new keo 2 max has also been optimized. Increasing the pedals usable contact surface, improves the Power to Weight ratio, without any additional weight gain, making the product even better and allowing you to perform at your best.

This creates a feeling of unrivaled comfort not found in any other pedal. Look also sought to optimize power transfer thanks to its new 500 mm of usable surface +25% increase. The look design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. The contact surface of the new keo 2 max preserves the strong lines on which its history was built. The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot depending upon the angular float you use, the same amount of contact for consistent performance.

Built around an oversized chromoly plus steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling.
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.09 Pounds
Width3 Inches
Part Number16090
ModelPEK2M16090

3. LOOK

#ad

LOOK Keo Blade Pedal, White

#ad
LOOK #ad - Crisper in and out clipping. Excellent pedalling stability. Aerodynamic shape and low weight. All the benefits of a blade pedal.
BrandLOOK #ad
ManufacturerLOOK #ad
Height1.97 Inches
Length3.94 Inches
Weight0.68 Pounds
Width3.94 Inches
Part Number17835
ModelPEKB17835

4. Look

#ad

LOOK Keo Sprint Pedal

#ad
Look #ad - Built with spring technology, the platform surface is reinforced with a stainless-steel plate that gives it exceptional longevity. Designed for occasional, it is possible to adjust the tension between 8 and 12 for a safe entry/release. To increase its durability, efficient, leisure and new riders, Keo Sprint pedals are reliable, and extremely durable.
BrandLook #ad
ManufacturerLook #ad
Height1.97 Inches
Length3.94 Inches
Weight0.62 Pounds
Width3.94 Inches
Part NumberPEKSP12798
ModelPEKSP12798

5. LOOK

#ad

LOOK Keo Classic 3 Pedals Black

#ad
LOOK #ad - Axle: Chromoly. Threading: 9/16 X 20 mm. Body: Composite. Bearings: 1 ball bearing, 1 needle bearing cartridge. Usage: Beginner to advanced.
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.09 Pounds
Width3 Inches
Part Number450881-01
ModelPEKC14260

6. LOOK

#ad

Black/Red, LOOK Keo Classic 3 Road Pedals

#ad
LOOK #ad - A spacer is used to hold the needle bearing cartridge in place. The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance.

Its large and wide contact surface provides excellent pedaling stability. Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution.

Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 .
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.09 Pounds
Width3 Inches
Part Number15837
ModelPEKC15837

7. LOOK

#ad

LOOK Keo Classic 3 Road Pedals, Black/White

#ad
LOOK #ad - Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals.

Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. Its large and wide contact surface provides excellent pedaling stability. This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 .
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.09 Pounds
Width3 Inches
Part Number15836
ModelPEKC15836

8. LOOK

#ad

LOOK Keo Grip Road Cleats, Grey 4.5

#ad
LOOK #ad - In order to use this system, the sole of your shoes must have a central oblong where the memory position part will be screwed. The position of your cleats can be customized with the KEO FIT system.

The position memory look patent easily allows the adjustment of your cleats when you need to change them. Three float options are available to fit the needs of every cyclist: 0 ° black / 4. 5 ° grey / 9 ° red. The entry and the release are secure and work well. The keo standard was developed in order to minimize the weight and size of the cleat/pedal ensemble, while remaining compatible with all shoes available on the current market.
BrandLOOK #ad
ManufacturerLook #ad
Height5 Inches
Length2 Inches
Weight0.15 Pounds
Width3 Inches
Part Number8150
Model6008190200LOO