As an Amazon Associate I earn from qualifying purchases.
Park Tool #ad - The opposite end has two ears that are 23mm wide and approximately 5mm wide. Hcw series. Made in USA.
Park Tool #ad - Adjusts to a wide range of pin hole widths, pin diameter is nominally 0090 inch2. 3mm. Will fit one-key release retaining rings on shimano and campagnolo cranksets and the adjusting cone on most freewheel clusters not freehubs.
Park Tool #ad - Also fits single-speed cassette hubs using lockrings with external notches. The hcw-17 features two different radius hooks for a precise fit on most head-gear lockrings. One is sized to fit rings with an outside diameter of 41 to 42mm. The other side fits rings of 43 to 44mm.
Park Tool #ad - Heat treated to prevent bending, flexing and wear. Updated to fit current 12-speed cassettes including SRAM AXS & Shimano XTR systems. Molded handle for extra comfort.
1. Park Tool
#adPark Tool 109917 HCW-5 Lock Spanner
#adPark Tool #ad - For fixed gear lockring, use the HCW-17. Double sided bottom bracket lockring hook spanner. The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter in the notches of 40mm.More information #ad
One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings. Note: the hcw-5 is designed for bottom bracket lockrings.| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 11 Inches |
| Length | 2.5 Inches |
| Weight | 0.48 Pounds |
| Width | 0.25 Inches |
| Part Number | QKHCW5 |
| Model | 109917 |
| Warranty | Limited Lifetime Warranty – see parktool.com/warranty |
More information #ad
2. Park Tool
#adPark Tool Slotted Bottom Bracket Adjustable Cup Wrench, 16mm
#adMore information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 8 Inches |
| Length | 2.5 Inches |
| Weight | 0.25 Pounds |
| Width | 0.1 Inches |
| Part Number | QKHCW11 |
| Model | 118269 |
| Warranty | Limited Lifetime Warranty – see parktool.com/warranty |
More information #ad
3. Park Tool
#adPark Tool SPA-2 Cluster Cone Pin Spanner Red
#adMore information #ad
Handle is vinyl coated to give a good grip. Tough, high carbon tool steel is used on each tool to ensure long life. Each pin spanner is color coated for easy recognition.| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 11 Inches |
| Length | 3.25 Inches |
| Weight | 0.05 Pounds |
| Width | 1 Inches |
| Part Number | 109937 |
| Model | 109937 |
More information #ad
4. Park Tool
#adPark Tool FR-5.2GT Cassette Lockring with Tool 12mm Pin
#adPark Tool #ad - Fits 12-spline cassette lock rings from shimano, Sun Race, Sun Tour, SRAM including 1x, Chris King and others 23.5mm diameter.More information #ad
Utilizes a 12mm guide pin to stabilize the tool in use. The fr-5. 2gt is designed specifically for use when removing and installing cassette lock rings from thru axle hubs.| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 2 Inches |
| Length | 7 Inches |
| Weight | 0.2 Pounds |
| Width | 4 Inches |
| Part Number | QKFR52GT |
| Model | QKFR52GT |
| Warranty | Limited Lifetime Warranty - See parktool.com/warranty |
More information #ad
5. Park Tool
#adPark Tool CCP-22 Crank Puller
#adPark Tool #ad - Note: for cranks using the isis drive or Octalink system, use the CCP-44 or the CWP-7. Strong rotating tip system ensures smooth operation and long life.More information #ad
Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles. Also fits "power spline" cranks from SRAM using the 8mm thread bolt.| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 10.5 Inches |
| Length | 4.5 Inches |
| Weight | 0.45 Pounds |
| Width | 1 Inches |
| Part Number | CCP-22 |
| Model | CCP-22 |
| Warranty | Limited Lifetime Warranty – see parktool.com/warranty |
More information #ad
6. Park Tool
#adPark Tool Head-Gear Lockring Wrench HCW17
#adMore information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 11 Inches |
| Length | 2.5 Inches |
| Weight | 0.5 Pounds |
| Width | 0.25 Inches |
| Part Number | QKHCW17 |
| Model | 145120 |
More information #ad
7. Park Tool
#adPark Tool SR-12.2 Sprocket Remover/Chain Whip for 7- to 12-Speed Bicycle Cassettes
#adMore information #ad
1" 25. 4mm box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools. Works on all 7- to 12-speed road and mountain bike cassettes as well as 3/32" single-speed cassettes.| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 1.06 Inches |
| Length | 14.21 Inches |
| Weight | 0.8 Kilograms |
| Width | 3.15 Inches |
| Part Number | SR-12.2 |
| Model | SR-12.2 |
More information #ad
8. Park Tool
#adPark Tool Bottom Bracket Wrench
#adPark Tool #ad - We carry everything you need for all your bicycle repair and maintenance. Made in the USA. Feeders and accessories will improve the interest of wild game.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Park Tool #ad |
| Height | 1 Inches |
| Length | 10 Inches |
| Weight | 0.15 Pounds |
| Width | 3 Inches |
| Part Number | 373-697 |
| Model | 373-697 |
More information #ad
9. Park Tool
#adPark Tool Master Link Pliers MLP-1.2
#adPark Tool #ad - Compatible with all 5, 6, 8, 9, 7, 10 and 11-speed derailleur chains that use a master link. Made in the USA.More information #ad
| Brand | Park Tool #ad |
| Manufacturer | Pro-Motion Distributing - Direct #ad |
| Height | 0.4 Inches |
| Length | 6.5 Inches |
| Weight | 133 Grams |
| Width | 2.1 Inches |
| Part Number | 373-901 |
| Model | 373-901 |
| Warranty | Limited Lifetime Warranty |
More information #ad
