Top 9 Scope Rings for Picatinny Rail – Sporting Optics Rings

As an Amazon Associate I earn from qualifying purchases.

1. Vortex

#ad

Vortex Optics Hunter 1-inch Riflescope Rings, Medium Height 0.87 in

#adVortex #ad - Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Base clamp screws:25-30 in/lbs. Sold two rings per package. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Brand	Vortex #ad
Manufacturer	Vortex Optics #ad
Height	1.88 Inches
Length	3.5 Inches
Weight	0.2 Pounds
Width	5 Inches
Part Number	RING-M
Model	RING-M
Warranty	Unlimited, unconditional lifetime warranty.

2. Modkin

#ad

Modkin 1'' Scope Rings, 2Pcs High Profile Scope Mounts + 2Pcs Medium Profile 1 Inch Scope Rings for Picatinny/Weaver Rail, Pack of 4

#adModkin #ad - Premium aircraft aluminum, high quality, build no wobble, solid & durableprecision machining of aircraft grade 6061 aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy Construction, Sturdy & Lightweight Construction, Offer Durable Safe Performance In The Field.

Hollowed-out design & built-in tape protectiondesign in see-through style, meanwhile hollowed-out configuration Helps To Release Heavy Duty When Clamping Your Scope. 4 set of two styles 1'' scope rings2 pcs medium profile - 05'' gap from base of mount to bottom of ring - item height 1. 9'' - dimension: 1. 9 x 1. 6 x 08 inch - weight: 2 oz per ring; 2 Pcs High Profile - 071'' gap from base of mount to Bottom Of Ring - Item Height 2.

0'' - dimension: 2. 0 x 1. 6 x 08 inch - weight: 2 Oz Per Ring. Perfect for all 21mm picatinny/ weaver railsmodkin 4 set of different heights 1'' scope mount rings include 2 pcs medium profile 2 pcs high profile In One Package. Built-in tape inside per rings to prevent from marring The Scope, Provide Potential Visibility For Open Sights, Also Prevent Sliding and Holding Postion Accurately.

Brand	Modkin #ad
Manufacturer	Modkin #ad

3. Monstrum

#ad

Medium, Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height

#adMonstrum #ad - Available in two heights to match your needs: 080 inch and 1. 00 inch. Monstrum tactical precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. 1 inch diameter rings for mounting standard 1 inch rifle scope tubes. Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts. 1. 00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.

Brand	Monstrum #ad
Manufacturer	Monstrum #ad
Part Number	SR-1-P100

4. GoldCam

#ad

GoldCam 1'' Scope Rings, 2Pcs High Profile + 2Pcs Medium Profile 1 Inch Scope Mount Rings for Picatinny/Weaver Rail, Pack of 4

#adGoldCam #ad - Our scope rings perfect for all 21mm standard picatinny/ weaver rails, available In Two Styles For Your Choose, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1''/ 25. 4mm scope Tube. Comes with 2 Pcs Allen Wrench. Built-in tape inside per rings to prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.

4 set of two styles 1'' scope rings2 pcs medium profile - 05'' gap from base of mount to bottom of ring - item height 1. 9'' - dimension: 1. 9 x 1. 6 x 08 inch - weight: 2 oz per ring; 2 Pcs High Profile - 071'' gap from base of mount to Bottom Of Ring - Item Height 2. 0'' - dimension: 2. 0 x 1. 6 x 08 inch - weight: 2 Oz Per Ring. Hollowed-out design & built-in tape protectiondesign in see-through style, provide potential visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope.

Premium aircraft aluminum, solid & durableprecision machining of aircraft grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy Construction, Build No Wobble, high quality, Sturdy & Lightweight Construction, Offer Durable Safe Performance In The Field. Rail clamp screw design & easy to installwith 1 rail clamp screw and 2 scope clamp screws per side, Ensure Mount Any 1'' Scope Firmly, just twist on/off the Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install.

Brand	GoldCam #ad
Manufacturer	GoldCam #ad
Height	0.8 Inches
Length	2 Inches
Width	1.57 Inches

5. Monstrum

#ad

Monstrum H-Series Offset Picatinny Scope Rings | 1 inch Diameter

#adMonstrum #ad - Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief. For mounting 1 inch diameter scope tubes to standard Picatinny rail platforms.

Uses hardened steel Torx mounting hardware to prevent stripping of the bolts. High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights. Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.

Brand	Monstrum #ad
Manufacturer	Monstrum #ad
Part Number	ZRR-2-B

6. Vortex

#ad

Low Height 0.75 Inches | 19.05 mm, Black, 1 inch, Vortex Optics Pro Series Riflescope Rings

#adVortex #ad - The finishing touch to your rifle and optic combination. Fits weaver and Picatinny Rails. Pro series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting. Sold two rings per package. Weight per ring: 39. 9 grams - 1. 41 oz. These vortex pro series rings position the center of the riflescope tube at a height of 075 inches 19. 05 mm from the base.

Brand	Vortex #ad
Manufacturer	Vortex Optics #ad
Height	9.1 Inches
Length	9.1 Inches
Weight	0.2 Pounds
Width	9.1 Inches
Part Number	PR1-L
Model	PR1-L
Warranty	Manufacture Warranty

7. Modkin

#ad

Set of 2, Medium Profile Scope Mounts for Picatinny/Weaver Rail 1 inch, Modkin Rifle Scope Rings

#adModkin #ad - Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.

Item height: 1. 9''. With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily. Double scope ring mount for Picatinny/ Weaver Rail 21mm. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. The ring is for most scopes which are in 1''/ 25. 4mm scope tube. Medium profile, 05'' gap from base of mount to bottom of ring.

Brand	Modkin #ad
Manufacturer	Modkin #ad

8. BESTSIGHT

#ad

BESTSIGHT Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting.

#adBESTSIGHT #ad - More stableuse of 6 screws in total is more stable and secure than 2 screws on standard mounts. Easy to operateScope mount with two round buttons for easy detach. Defect: whether it is installed or disassembled, you need to remove 12 screws. Suitable for high recoilHold up under heavy recoil sustained fire in the most extreme shooting circumstances. Fits 20mm picatinny weaver rails and for both 30mm and 25. 4 mm 1 inch body tube rifle scopes.

Brand	BESTSIGHT #ad
Manufacturer	bestsight outdoor #ad
Height	3 Inches
Length	5.2 Inches
Width	1.2 Inches

9. BESTSIGHT

#ad

BESTSIGHT Rifle Scope Ring Set 1inch/30mm High Profile Multi Picatinny/Weaver Rail Scope Ring

#adBESTSIGHT #ad - Multifunctional scope Mounts ：attachment of laser/flashlight mounts, red dot sights or rifle scope accessories. Double scope ring mount for Picatinny/ Weaver Rail 20mm. Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction. 1 inch or 30mm diameter scope rings for mounting standard 1" /30mm tube rifle scopes. Regardless of installation or removal, you need to remove 12 screws.

Brand	BESTSIGHT #ad
Manufacturer	bestsight outdoor #ad