Vacuforce CV15H CV Vacuum Venturi Generator, 1.5 mm Nozzle, 26.5″ Hg

#ad
#ad
Vacuforce CV15H #ad - Vacuforce CV15H CV Vacuum Venturi Generator, 1.5 mm Nozzle, 26.5" Hg #ad - Maximum vacuum of 27"Hg. Single Stage Technology. Vacuum flow Rates up to 8CFM. Anodized Aluminum Body. Cv vacuum venturi • anodized aluminum body• all metal construction• maximum vacuum of 27”Hg• Vacuum Flow Rates up to 8CFM• Single Stage Technology• HSK Models Include Part Presence Switch Switch.

More information about Vacuforce CV15H #ad

Kingston KMBVM Series Brass Mini Ball Valve, Lever, 1/4" NPT Male x NPT Female

#ad
#ad
Kingston Valves KMBVM-2B #ad - Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Lever handle for on/off manual control. This kingston kmbvm series mini ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off manual control, and full port flow for higher operating efficiency than standard port.

Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Chrome-plated brass for higher corrosion resistance than regular brass or steel.

Kingston KMBVM Series Brass Mini Ball Valve, Lever, 1/4" NPT Male x NPT Female #ad - The company, is headquartered in Torrance, founded in 1908, CA. Female and male npt threads for connecting male threaded pipe fittings to female threaded pipe fittings. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline resulting in lower friction and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.

Ball valves can be referred to as full port or reduced port also known as regular or standard port depending on the inner diameter or the valve. Ball valves may have a handle or lever that aligns with the ball’s position open or closed for manual operation. Full port flow for higher operating efficiency than standard port.

More information about Kingston Valves KMBVM-2B #ad


Similar products



Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/4" x 1/4" NPT Male Pipe

#ad
#ad
Anderson Metals 56122-04 #ad - This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Nipple for connecting two threaded pipes. Lever handle for on/off manual control. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. When purchasing pipe fittings, as this will affect material type, shape, consider the application, size and required durability.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance.

Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/4" x 1/4" NPT Male Pipe #ad - Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Brass can be connected to copper, aluminum, plastic, brass, and welded steel. The nipple fitting is a short length of pipe with threaded ends for connecting two threaded pipes.

It has male national pipe taper NPT threads for connecting to female threaded pipes, creating a tighter seal than straight threads. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S.

More information about Anderson Metals 56122-04 #ad


Similar products



Vacuforce CV10H CV Vacuum Venturi Generator, 1.0 mm Nozzle, 26.5" Hg

#ad
#ad
Vacuforce CV10H #ad - Maximum vacuum of 27"Hg. Full port flow for higher operating efficiency than standard port. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Cv vacuum venturi • anodized aluminum body• all metal construction• maximum vacuum of 27”Hg• Vacuum Flow Rates up to 8CFM• Single Stage Technology• HSK Models Include Part Presence Switch Switch.

Vacuum flow Rates up to 8CFM. Single Stage Technology. Chrome-plated brass for higher corrosion resistance than regular brass or steel. Nipple for connecting two threaded pipes. Inline valve for connecting two pipes going in the same direction. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

Vacuforce CV10H CV Vacuum Venturi Generator, 1.0 mm Nozzle, 26.5" Hg #ad - S. A. Male npt threads for connecting to female threaded pipes. Lever handle for on/off manual control. And its territories. Anodized Aluminum Body. Operating temperature range of -65 to +250 degrees F.

More information about Vacuforce CV10H #ad


Similar products



Parker ASN-8 Acetal Plastic Exhaust Air Line Silencer, 1/4" NPT, 124 scfm Flow, 150 psi

#ad
#ad
Parker ASN-8 #ad - Single Stage Technology. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Male npt threads for connecting to female threaded pipes. Compact, lightweight. Operating temperature range of -65 to +250 degrees F. Female and male npt threads for connecting male threaded pipe fittings to female threaded pipe fittings.

The plastic silencer is designed to give excellent noise reduction with a minimum effect on air efficiency. Excellent noise reduction. Polyethylene element. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Fits directly into the exhaust port of most commercial valves.

Parker ASN-8 Acetal Plastic Exhaust Air Line Silencer, 1/4" NPT, 124 scfm Flow, 150 psi #ad - Lever handle for on/off manual control. Sound pressure level 67dba at 20 psIG inlet and 84dBA at 100 PSIG inlet. Protects components from contamination. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Open surface area of element allows for rapid discharge of air without undesirable back pressure.

More information about Parker ASN-8 #ad


Similar products



Anderson Metals 56101 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe

#ad
#ad
Anderson Metals 56101-04 #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. Anodized Aluminum Body. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Nipple for connecting two threaded pipes. The tee fitting is t-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.

This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance. Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries.

Anderson Metals 56101 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe #ad - Protects components from contamination. Tee with three openings for connecting and branching three pipes. Inline valve for connecting two pipes going in the same direction. Brass can be connected to copper, brass, plastic, aluminum, and welded steel.1/4" npt threads available. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

More information about Anderson Metals 56101-04 #ad


Similar products



2" Utility Vacuum Pressure Gauge for air compressor water oil gas, WOG, 1/4" NPT Lwr Mount, 30HG/0PSI GSAD2012-VUPD, OEM

#ad
#ad
DuraChoice PAG204L-V00 #ad - Male npt threads for connecting to female threaded pipes. Tee with three openings for connecting and branching three pipes. Female npt threads for connecting to male threaded pipes. Operating temperature range of -65 to +250 degrees F. Dial size: 2" dial size crimped casing accuracy: +/- 4/3/4% scale: dual scale - psi / bar movement: copper alloy Bourdon Tube: Copper Alloy Window: Glass Case: Steel case for protection in harsh environments Connection: Copper Alloy Lower Mount; 1/4" NPT for 2" dial Normal Ambient Temp.

2" Utility Vacuum Pressure Gauge for air compressor water oil gas, WOG, 1/4" NPT Lwr Mount, 30HG/0PSI GSAD2012-VUPD, OEM #ad - 4f to +140f -20c to +60c chrome-plated brass for higher corrosion resistance than regular brass or steel. Protects components from contamination. Vacuum flow Rates up to 8CFM. Inline valve for connecting two pipes going in the same direction. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Broad applications - water, oil, air and more. 1/4" lower mount connection.

More information about DuraChoice PAG204L-V00 #ad


Similar products



HFS Tm Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand

#ad
#ad
Hardware Factory Store 11636 #ad - Excellent noise reduction. Operating temperature range of -65 to +250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Female npt threads for connecting to male threaded pipes. 1/4" lower mount connection. Nipple for connecting two threaded pipes.

Lever handle for on/off manual control. Operating temperature range of -65 to +250 degrees F. Useful for holding dial indicators or test indicators during alignment operations. The arm can be locked in any position using the tightening knob. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

HFS Tm Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand #ad - 360cm / 14. 1 inch. Easy to install. Total height: approx. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. A magnetic stand that uses a switchable permanent magnet for convenient mounting onto metal surfaces. 1/4" npt threads available. Broad applications - water, oil, air and more.

More information about Hardware Factory Store 11636 #ad


Similar products



USB Microscope, MixMart Digital USB Microscope True High Definition Macro 2MP Video Camera 500x Zoom Imaging 1600x1200 Advanced CMOS Sensor with 8 LED Windows, MAC, Linux OS

#ad
#ad
MixMart 4331891392 #ad - Protects components from contamination. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Single Stage Technology. Lexible, and precise rotary joints, strong, can adjust any direction and location. With high stability, it will be your ideal tool in the measurement of precision work-piece field.

Beware of knockoff sellers, legitimate quality microscope and 100% satisfaction guaranteed! hd display: provide high-definition image and video at 1600X1200 resolution and 30fps with 2. 0mp cmos sensor, clearly view details. 1/4" lower mount connection. And its territories. Professional quality & durability. 6.

USB Microscope, MixMart Digital USB Microscope True High Definition Macro 2MP Video Camera 500x Zoom Imaging 1600x1200 Advanced CMOS Sensor with 8 LED Windows, MAC, Linux OS #ad - Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. If you want to connect to android phone via OTG cable which is not included in package, make sure your phone camera is compatible with UVC. Full port flow for higher operating efficiency than standard port. Permanent magnet operation with ON/OFF control.

Capture footage】digital usb microscope you can capture live AVI video or take images in BMP format while connecting usb microscope to your computer.

More information about MixMart 4331891392 #ad


Similar products